Partner companies across Toronto
(858) 284-0173

This week

Seamless Eavestrough in Toronto

Aluminum coil run through a forming machine at the curbside and fitted in single lengths. The visible difference is small; the difference in how it ages is not.

Call (858) 284-0173 Do you need it?

Call about Seamless Eavestrough

(858) 284-0173

No charge to you, and you are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with the insured partner covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having ready

  • What it is doing — overflowing, dripping, sagging or frozen
  • How many storeys, and whether there is a rear addition
  • Whether any basement damp has shown up on that side
  • Your postal code
  • Licensed & insured Ontario does not licence this trade at provincial level, so the checks that actually mean something are current liability insurance and a WSIB clearance certificate. Ask the partner to see both — a legitimate one hands them over without being chased.
  • Know what to ask You are told what actually decides the price, so you can judge a quote.
  • Someone local You are put through to a technician who works your area, not a call centre in another province.
  • Calls answered 7 days Someone picks up seven days a week, weekends included.

Is it urgent?

This week

Joints are where eavestroughs fail, and freeze-thaw works on them every year. Removing most of the joints removes most of the future repairs.

Almost every serious injury in this trade is a ladder, and almost every one of those is somebody clearing their own troughs on a wet or icy day. If the troughs are frozen, do not climb and do not chip at the ice — it comes away in heavy pieces and it takes the fascia with it. And never put salt in an eavestrough: it will damage the trough, the fasteners and whatever is planted below.

Signs to look for

  • An older sectional system leaking at several joints
  • Repeated resealing of the same corners
  • Planning a new installation anyway
  • A long straight run where a sectional system would need many joints

How the work is done

  1. Measure each run and form it in one continuous length on site
  2. Mitre and seal the corners, which are the only joints left
  3. Fit hidden hangers rather than spikes, which work loose in freeze-thaw
  4. Test the full run with water before leaving

In Toronto specifically

Toronto's humid continental — long cold winters, humid summers, and a freeze-thaw shoulder season either side climate and its housing stock — Victorian and Edwardian semis through the old city, postwar bungalows and backsplits across Scarborough, North York and Etobicoke, and a downtown core that is almost entirely towers — decide what is worth doing first. Where a downspout may discharge is a City of Toronto matter, and the city has been actively disconnecting downspouts from the sewer system rather than into it. Ontario does not licence this trade, so the checks worth making are liability insurance and a WSIB clearance certificate.

Before the technician arrives

Four things worth doing — and the first one is usually the thing people get wrong.

  1. Ask whether it is being formed on site — that is what makes it seamless.
  2. Ask about the gauge of the aluminum. Thin coil dents when a ladder touches it.
  3. Pick the colour to match the fascia rather than the roof, since that is what it sits against.
  4. Ask what happens at the corners, which are still joints.

What the work looks like

Photographs of seamless eavestrough being carried out, so you know what to expect on the day.

How it works

Three steps, and you decide at the end of them.

  1. 1

    You call and describe the problem

    Tell us what you have noticed and where — the room, the smell, the noise, how long it has been going on. Give us your postal code and we will match you to a licensed company covering your area. There is no form to fill in.

  2. 2

    A local company takes it from there

    They discuss the problem with you directly, arrange a time to inspect, and agree the work and the price with you before anything starts. That conversation is between you and them.

  3. 3

    You decide whether to go ahead

    You are under no obligation. If the quote or the approach is not what you wanted, you are free to say no and call someone else.

Seamless Eavestrough — FAQs

Do I actually need Seamless Eavestrough done?

Joints are where eavestroughs fail, and freeze-thaw works on them every year. Removing most of the joints removes most of the future repairs.

What does Seamless Eavestrough involve?

Aluminum coil run through a forming machine at the curbside and fitted in single lengths. The visible difference is small; the difference in how it ages is not.

What makes this different in Toronto?

Toronto's humid continental — long cold winters, humid summers, and a freeze-thaw shoulder season either side climate and its housing stock — Victorian and Edwardian semis through the old city, postwar bungalows and backsplits across Scarborough, North York and Etobicoke, and a downtown core that is almost entirely towers — decide what is worth doing first. Where a downspout may discharge is a City of Toronto matter, and the city has been actively disconnecting downspouts from the sewer system rather than into it. Ontario does not licence this trade, so the checks worth making are liability insurance and a WSIB clearance certificate.

Are the companies licensed and insured?

Yes. We only work with licensed, insured partners in Toronto, and you are welcome to ask to see a licence number on arrival.

What does Seamless Eavestrough cost?

It depends on the property, the size of the system and what the inspection finds, so we do not publish a price — a figure quoted on a web page is not one the attending company has agreed to. You get a price before any work starts.

Seamless Eavestrough near you

All Toronto towns →

Call now How it works